Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round, rotatable stator b
Shoulder Diameter:
Between 1.5615 inches and 1.5620 inches
Pilot Diameter:
0.9375 inches
Overall Length:
3.7330 inches
Flange Diameter:
Between 1.7490 inches and 1.7500 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Width:
0.0780 inches
Body Diameter:
1.9000 inches
Shaft Diameter:
0.1870 inches single shaft and 0.1872 inches single shaft
Shaft Length:
0.5450 inches single shaft and 0.5650 inches single shaft
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
7.0 milliamperes
Stator Input Electrical Power Rating:
250.0 milliwatts
Frequency In Hertz:
400.0
Phase Shift Angle In Deg:
3.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
35.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
65.00
Electrical Error Angular Range In Minutes:
-8.0/+8.0
Spline Tooth Quantity:
21 single shaft
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0006 inches
Shaft End Play:
0.0030 inches
Pilot Length:
Between 0.0370 inches and 0.0430 inches
Shoulder Length:
Between 0.1290 inches and 0.1350 inches
Mounting Surface To Terminal End Distance:
3.3300 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Maximum Runout:
0.0008 inches
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Type:
Spline w/threads single shaft
Transformation Ratio:
Between 0.721 rotor to stator and 0.749 rotor to stator
Shaft Thread Size:
0.1900 inches single shaft
Shaft Radial Play Determining Weight:
16.0 ounces
Shaft End Play Determining Weight:
16.0 ounces
Terminal Type And Quantity:
5 screw
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
